How to reset drum and toner Brother HL-2321D printer

Saturday - 04/12/2021 10:28

The Brother HL - 2321D is a printer with an ink chip attached. Therefore, when the number of prints reaches the chip limit, the toner or drum error yellow light will light up. At this point, you must replace the toner cartridge or a new drum.

However to save, we can reset them, by:

Reset Drum Brother HL - 2321D

- Power on the printer
- Open the front cover of the printer
- Press and hold the GO button until the 4 lights turn on.
- Release the Go button when only the Paper light is on.
Wait a few seconds, then close the front cover of the printer and restart the printer.

Reset toner Brother HL - 2321D

- Turn off the printer
- Open the front cover of the printer
- Press and hold the GO button and then power on the printer
- The lights will light up, wait a few seconds, release the GO button
- Wait a few seconds, press the GO button 9 times
- The lights will light up, wait a few seconds, press GO button 5 times
- Wait a few seconds, close the printer cover, the Ready light will light up.
Then restart your printer and now your printer is working normally.

Royal VF

Tags: reset drum and toner, Brother HL-2321D